NKYERƐKYERƐMU NKYERƐKYERƐMU
| PARAMETER NKYERƐKYERƐMU | ƆFA | HMD130M8-IIP na ɛwɔ hɔ | |||
| amanaman ntam kɛseyɛ ho nkyerɛkyerɛmu | -- | 445/130 | |||
| INJECTION NKYEKYƐMU | A | B | C | D | |
| Injection volume(nsusuwii) . | cm3 na ɛwɔ hɔ | 193 | 215 | 263 | 316 |
| Injection mu duru(PS) . | g | 176 | 196 | 239 | 287 |
| oz | 6.2 | 6.9 | 8.4 | 10.1 | |
| Injection dodow a wɔde ma | g/s | 160 | 178 | 217 | 261 |
| Screw no kɛse | mm | 36 | 38 | 42 | 46 |
| Nhyɛso a wɔde twitwiw nipadua no mu | MPa | 230 | 207 | 169 | 141 |
| Skru L/D nsusuwii | -- | 23.5:1 | 22:1 | 20:1 | 18:1 |
| Screw a wɔde hyɛ mu | mm | 190 | |||
| Screw ahoɔhare(anammɔn biara) . | r/min | 0-300 | |||
| CLAMPING NKYERƐKYERƐMU | |||||
| Tumi a wɔde kyekyere nneɛma | kN | 1300 | |||
| Mould Opening stroke a ɛyɛ mmerɛw | mm | 380 | |||
| Platen kɛse | mm×mm | 630×610 | |||
| Dist.between tie nnua(H × V) . | mm×mm | 425×405 | |||
| Max.awia hann | mm | 840 | |||
| Nkuku no mu duru(Min-Max) | mm | 150-460 | |||
| Ejector a ɛma obi hwe ase | mm | 125 | |||
| Ejector tonnage a ɛyɛ den | kN | 42 | |||
| TUMI NKYERƐKYERƐMU | |||||
| Hydraulic nhyehyɛe no nhyɛso | MPa | 17.5 | |||
| Pɔmpɛ motor ahoɔden | kW | 31.3 | |||
| Heater ahoɔden | kW | 11 | |||
| Dodow a ɛwɔ temp control zones mu | -- | 4 | |||
| AFOFORO | |||||
| Ngo a wɔde gu mu no tumi | L | 135 | |||
| Mfiri no nsusuwii(L × W × H) . | m×m×m | 4.5×1.4×1.9 | |||
| Mfiri mu duru | Ton | 4 | |||
INJECTION NKYEKYƐMU
Injection a ɛyɛ ahoɔhare kɛse
Tu mpɔn hydraulic controlsystem,ma injection ahoɔhare kɔ soro kɛse a ɛma kurukuruwa bere tiaa,titiriw ma thin-fasu nneɛma.
Frication a ɛba fam nhyehyɛe
Injection unit no de linearguide dii dwuma,na friction no so tew na ɛma ahoɔhare kɔɔ soro bere a wɔde injection rema no.
Double injection cylinder abaa a wɔde hyɛ mu
Adapt bi-direction piston poma ma injection cylinder, tenten oilseal nkwa nna,injection kɛse stable.
Screw&Barrel a wɔde yɛ nneɛma
Standard ne infrared ɔhyew bands,ɛnyɛ plasticizing tumi.
CLAMPING NKYERƐKYERƐMU
Hyɛ den platen a wɔfrɛ no platen
Platen a wɔatu mpɔn a ɛwɔ rigidity nhyehyɛe a ɛkorɔn,titiriw a ɛfata ma thin-fasu nneɛma.
Tie bar a wɔde kyekyere nneɛma
Wɔde ally metallic tie bar a ɛma ahoɔden a ɛma nkwa nna no yɛ tenten ahyɛ mu.
HYDRAULIC NKYERƐKYERƐMU
Nsu a wɔde yɛ adwuma
Nkɔanim hydraulic control nhyehyɛe,afiri ntɛmntɛm ne pii efficiency,shorten production cycle time.Standard ne clamping proportional valve,ntɛmntɛm mmuae ne pɛpɛɛpɛ control.
Nsu a wɔde yɛ adwuma motor no
Hydrolic motor a ɛyɛ ahoɔhare kɛse-.
ELECTRIC NKYERƐKYERƐMU
Ɔhwɛfo
Adapt Italy INOVA kɔmputa,ne 10inch kɔla LED screen,hu pɛpɛɛpɛyɛ ne ntɛmntɛm adeyɛ.
Electric element
Contractorand limited switch adapt Omron ne Schneider.
Tags a ɛyɛ hyew .: aduruyɛ plastic molding, China aduruyɛ plastic molding manufacturers, suppliers, adwumayɛbea
