Center reinforced platen design,fata ma molds a ehia high center ahoɔden ahwehwɛde te sɛ paint buckets.Clamping unit kɛse stable na ntɛmntɛm, ne rigidity pa ne nkwa nna tenten tie bar.
Special design screw tu mpɔn plasticizing ne charging tumi,shortens bere a wɔyɛ. High-speed charging motor ma charge ahoɔhare no kɔ soro.
Adopt mmɔho abien nkɔanim servo motor nhyehyɛe,standard ne eject wɔ fly,na ama atu mpɔn production efficiency.(Gye HMD430M8-SII)
Nsuo a ɛma onwini kyekyɛ a wɔde 15+1φ12 ntɛmntɛm plug ahyɛ mu. Adopt ne infrared ɔhyew band,ɔhyew pa a wɔkora so nkɛntɛnso,30%ahoɔden a wɔkora so sen mpapahwekwa ɔhyew band.
Ano aduru a Wɔde Yɛ Paint Bucket
| PARAMETER NKYERƐKYERƐMU | ƆFA | HMD430M8-SII na ɛwɔ hɔ | HMD500M8-SII na ɛwɔ hɔ |
| amanaman ntam kɛseyɛ ho nkyerɛkyerɛmu | -- | 2859/430 | 3165/500 |
| INJECTION NKYEKYƐMU | |||
| Injection volume(nsusuwii) . | cm3 na ɛwɔ hɔ | 1809 | 2042 |
| Injection mu duru(PS) . | g | 1646 | 1858 |
| oz | 58.1 | 65.6 | |
| Injection dodow a wɔde ma | g/s | 591 | 680 |
| Screw no kɛse | mm | 80 | 85 |
| Nhyɛso a wɔde twitwiw nipadua no mu | MPa | 158 | 155 |
| Skru L/D nsusuwii | -- | 22.5:1 | 22.7:1 |
| Screw a wɔde hyɛ mu | mm | 360 | |
| Screw ahoɔhare(anammɔn biara) . | r/min | 0-173 | 0-165 |
| CLAMPING NKYERƐKYERƐMU | |||
| Tumi a wɔde kyekyere nneɛma | kN | 4300 | 5000 |
| Mould Opening stroke a ɛyɛ mmerɛw | mm | 730 | 810 |
| Platen kɛse | mm×mm | 1032×1042 | 1128×1168 |
| Dist.between tie nnua(H × V) . | mm×mm | 760×730 | 830×830 |
| Max.awia hann | mm | 1460 | 1630 |
| Nkuku no mu duru(Min-Max) | mm | 250-730 | 300-820 |
| Ejector a ɛma obi hwe ase | mm | 185 | 210 |
| Ejector tonnage a ɛyɛ den | kN | 111 | 111 |
| TUMI NKYERƐKYERƐMU | |||
| Hydraulic nhyehyɛe no nhyɛso | MPa | 17.5 | 17.5 |
| Pɔmpɛ motor ahoɔden | kW | 72 | 48+31 |
| Heater ahoɔden | kW | 47.8 | 51.6 |
| Dodow a ɛwɔ temp control zones mu | -- | 6 | 6 |
| AFOFORO | |||
| Ngo a wɔde gu mu no tumi | L | 500 | 590 |
| Mfiri no nsusuwii(L × W × H) . | m×m×m | 8.0×2.0×2.6 | 8.3×2.1×2.6 |
| Mfiri mu duru | Ton | 18 | 22 |
Tags a ɛyɛ hyew .: bokiti injection molding afiri, China bokiti injection molding afiri ayɛfo, wɔn a wɔde ma, adwumayɛbea
