Turntable control denam servo motor.Injection unit ne biako cylinder nhyehyɛe ne akwankyerɛ linear.Injection unit frame a ahunmu betumi ahyɛ unit ketewa anaa tiawa screw.
Modular design,injection unit betumi exchange.Optimized control nhyehyɛe a eye kyɛn so wɔ mmuae ne pɛpɛɛpɛyɛ.
NKYERƐKYERƐMU NKYERƐKYERƐMU
| PARAMETER NKYERƐKYERƐMU | ƆFA | HMDP160 na ɛwɔ hɔ | |||
| amanaman ntam kɛseyɛ ho nkyerɛkyerɛmu | -- | 300 | 300 | ||
| INJECTION NKYEKYƐMU | A | B | A | B | |
| Injection volume(nsusuwii) . | cm3 na ɛwɔ hɔ | 93 | 108 | 124 | 141 |
| Injection mu duru(PS) . | g | 85 | 98 | 113 | 128 |
| oz | 3 | 3.5 | 4 | 4.5 | |
| Injection dodow a wɔde ma | g/s | 55 | 63 | 73 | 83 |
| Screw no kɛse | mm | 26 | 28 | 30 | 32 |
| Nhyɛso a wɔde twitwiw nipadua no mu | MPa | 342 | 295 | 257 | 226 |
| Skru L/D nsusuwii | -- | 23 | 21.4 | 22.6 | 21.2 |
| Screw a wɔde hyɛ mu | mm | 175 | 175 | 175 | 175 |
| Screw ahoɔhare(anammɔn biara) . | r/min | 0-244 | |||
| CLAMPING NKYERƐKYERƐMU | |||||
| Tumi a wɔde kyekyere nneɛma | kN | 1600 | |||
| Mould Opening stroke a ɛyɛ mmerɛw | mm | 340 | |||
| Platen kɛse | mm×mm | 960×680 | |||
| Rotary pon no kɛse | mm | 800 | |||
| Dist.between tie nnua(H × V) . | mm×mm | 710×440 | |||
| Max.awia hann | mm | 800 | |||
| Nkuku mu duru(Min-Max) . | mm | 160-460 | |||
| Ejector a ɛma obi hwe ase | mm | 140 | |||
| Ejector tonnage a ɛyɛ den | kN | 38×2 | |||
| Ɔkwan a ɛda barrel mfinimfini ntam | mm | 420 | |||
| TUMI NKYERƐKYERƐMU | |||||
| Hydraulic nhyehyɛe no nhyɛso | MPa | 17.5 | |||
| Pɔmpɛ motor ahoɔden | kW | 18.7 | |||
| Heater ahoɔden | kW | 6.8 | |||
| Dodow a ɛwɔ temp control zones mu | -- | 4×2 | |||
| AFOFORO | |||||
| Ngo a wɔde gu mu no tumi | L | 330 | |||
| Mfiri no nsusuwii(L × W × H) . | m×m×m | 5.2×1.76×2.1 | |||
| Mfiri mu duru | Ton | 7.1 | |||
INJECTION NKYEKYƐMU
Injection unit a mmɔho abien tetew set of barrel,injection wɔ fly,double kɔla ne biako shot products,to tew cycle time.Single cylinder of injection nhyehyɛe, pɛpɛɛpɛ ma injection.
Whole set supporter of injection unit ne mmɔho pɛpɛɛpɛ linear guard,pɛpɛɛpɛ ne ntɛmntɛm ahoɔhare starter.
Injection unit betumi ayɛ ne kɛse soronko,adapt ne soronko abien kɔla nneɛma.
Barrel a ɛwɔ PID ɔhyew a wɔde di dwuma.
HYDRAULIC NKYERƐKYERƐMU
Hydraulic circuits gye top brands valve ne hose.
Wɔde DIN gyinapɛn cone a nsɔano ring nkwaa,manifold ne G asaawa nsɔano gland.Self-asɔano magnetic ngofilter a ɛyɛ mmerɛw ma nsiesie.
NHYEHYƐE A WƆDE DI DWUMA
Wɔde KEBA controller a ɛkorɔn-adwumayɛ,LCD display kɛse ne man-mfiri adamfofa interface.Equipped ne abiɛsa hann alarm ne buzzer.
Tags a ɛyɛ hyew .: abien kɔla injection molding afiri, China abien kɔla injection molding afiri manufacturers, suppliers, adwumayɛbea
