Abien layer ne soronko nneɛma product,sɛ wɔde besi ananmu de mprenu adeyɛ.
Bere koro no ara mu injection anaa interval injection na adu gradient nkɛntɛnso.
Adap to nso yɛ kɔla biako ade,de ma mutil-diversity dwumadi ne ɔsom.
Optimized design of screw ne barrel,a ɛyɛ papa plasticizing tumi ne adwumayɛ.
Abien stage akwankyerɛ line nhyehyɛe a injection unit.
| PARAMETER NKYERƐKYERƐMU | ƆFA | HMD170-DM2 na ɛwɔ hɔ | HMD218-DM2 na ɛwɔ hɔ | ||
| amanaman ntam kɛseyɛ ho nkyerɛkyerɛmu | -- | 282/90 | 587/170 | 445/130 | 873/218 |
| INJECTION NKYEKYƐMU | A | B | A | B | |
| Injection volume(nsusuwii) . | cm3 na ɛwɔ hɔ | 129 | 276 | 215 | 471 |
| Injection mu duru(PS) . | g | 117 | 252 | 196 | 423 |
| oz | 4.1 | 8.9 | 6.9 | 15.1 | |
| Injection dodow a wɔde ma | g/s | 98 | 140 | 113 | 192 |
| Screw no kɛse | mm | 32 | 42 | 38 | 50 |
| Nhyɛso a wɔde twitwiw nipadua no mu | MPa | 219 | 202 | 207 | 186 |
| Skru L/D nsusuwii | -- | 22:1 | 21.8:1 | 22:01 | 22.2:1 |
| Screw a wɔde hyɛ mu | mm | 160 | 200 | 190 | 240 |
| Screw ahoɔhare(anammɔn biara) . | r/min | 0-300 | 0-243 | 0-259 | 0-240 |
| CLAMPING NKYERƐKYERƐMU | |||||
| Tumi a wɔde kyekyere nneɛma | kN | 1700 | 2180 | ||
| Mould Opening stroke a ɛyɛ mmerɛw | mm | 450 | 510 | ||
| Platen kɛse | mm×mm | 710×690 | 780×780 | ||
| Dist.between tie nnua(H × V) . | mm×mm | 480×460 | 530×530 | ||
| Max.awia hann | mm | 970 | 1060 | ||
| Nkuku mu duru(Min-Max) . | mm | 180-520 | 200-550 | ||
| Ejector a ɛma obi hwe ase | mm | 140 | 140 | ||
| Ejector tonnage a ɛyɛ den | kN | 50 | 50 | ||
| TUMI NKYERƐKYERƐMU | |||||
| Hydraulic nhyehyɛe no nhyɛso | MPa | 16 | 17.5 | ||
| Pɔmpɛ motor ahoɔden | kW | 18.7 | 23 | 17.5 | 17.5 |
| Heater ahoɔden | kW | 8.5 | 17.7 | 18.3 | 31.3 |
| Dodow a ɛwɔ temp control zones mu | -- | 3 | 5 | 9.6 | 22.6 |
| AFOFORO | |||||
| Ngo a wɔde gu mu no tumi | L | 260 | 530 | ||
| Mfiri no nsusuwii(L × W × H) . | m×m×m | 4.9×2.2×2.1 | 5.5×2.1×2.1 | ||
| Mfiri mu duru | Ton | 6.8 | 8.9 | ||
Tags a ɛyɛ hyew .: hybrid injection molding afiri, China afrafra injection molding afiri ayɛfo, wɔn a wɔde ma, adwumayɛbea
