NKYERƐKYERƐMU NKYERƐKYERƐMU
| PARAMETER NKYERƐKYERƐMU | ƆFA | HMD90M8-SII na ɛwɔ hɔ | ||
| amanaman ntam kɛseyɛ ho nkyerɛkyerɛmu | -- | 282/90 | ||
| INJECTION NKYEKYƐMU | A | B | C | |
| Injection volume(nsusuwii) . | cm3 na ɛwɔ hɔ | 129 | 163 | 201 |
| Injection mu duru(PS) . | g | 117 | 148 | 183 |
| oz | 4.1 | 5.2 | 6.5 | |
| Injection dodow a wɔde ma | g/s | 98 | 123 | 152 |
| Screw no kɛse | mm | 32 | 36 | 40 |
| Nhyɛso a wɔde twitwiw nipadua no mu | MPa | 219 | 173 | 140 |
| Skru L/D nsusuwii | -- | 22:1 | 19.6:1 | 17.6:1 |
| Screw a wɔde hyɛ mu | mm | 160 | ||
| Screw ahoɔhare(anammɔn biara) . | r/min | 0-300 | ||
| CLAMPING NKYERƐKYERƐMU | ||||
| Tumi a wɔde kyekyere nneɛma | kN | 900 | ||
| Mould Opening stroke a ɛyɛ mmerɛw | mm | 320 | ||
| Platen kɛse | mm×mm | 535×535 | ||
| Ahunmu a ɛda tie bars ntam | mm×mm | 360×360 | ||
| Max.awia hann | mm | 680 | ||
| Nkuku no mu duru(Min-Max) | mm | 150-360 | ||
| Hydraulic ejection a wɔde hyɛ nipadua mu | mm | 100 | ||
| Hydraulic ejection tumi | kN | 31 | ||
| TUMI NKYERƐKYERƐMU | ||||
| Hydraulic nhyehyɛe no nhyɛso | MPa | 16 | ||
| Pɔmpɛ motor ahoɔden | kW | 18.7 | ||
| Heater ahoɔden | kW | 8.6 | ||
| Dodow a ɛwɔ temp control zones mu | -- | 4 | ||
| AFOFORO | ||||
| Ngo a wɔde gu mu no tumi | L | 125 | ||
| Mfiri no nsusuwii(L × W × H) . | m×m×m | 4.0×1.21.9 | ||
| Mfiri mu duru | Ton | 3.5 | ||
NKYERƐKYERƐMU ƆFA
Smooth na Fast Movement, High Rigid Platen, Nkwa Tenten a Tie Bar.
Mfinimfini fã hyɛ den design clamping unit na enhance tie bar, akyi finite element nhwehwɛmu ne optimization,clamping afiri no wɔ mfaso horow a ɛyɛ mmerɛw na ɛyɛ ntɛmntɛm kankyee, pa rigidity platen ne nkwa tenten a tie bar.
Standard ne T-slot, mmerɛw nkuku mounted. Hydraulic motor no na ɛma afiri a ɛsesa nkuku a ɛyɛ adwuma no, ɛyɛ den, ɛyɛ ntɛmntɛm na ɛyɛ adwuma yiye, na ɛkora bere a wɔde hyɛ nkuku so no so.
INJECTION NKYEKYƐMU
Optimized Design of Screw and Barrel, a Ɛwɔ Plasticizing Tumi ne Adwumayɛ a Eye.
Double-cylinder injection system ne double carriage cylinder, sɛnea ɛbɛyɛ a wobɛhwɛ sɛ injection no kankyee no gyina na ɛyɛ mmerɛw.
Wɔde akwankyerɛ liner nhyehyɛe ahyɛ mu, a ɛwɔ ahoɔden a ɛba fam. Injection ne charge back pressure ntɛmntɛm, a injection pɛpɛɛpɛ a ɛkorɔn.
Optimize design of screw ne barrel, ne plasticizing tumi a ɛyɛ den ne plasticizing adwumayɛ a eye, na ama woahyia nneɛma soronko ahorow. Wɔhyɛ nneɛma atitiriw te sɛ injection piston rod, injection driving platen ne coupler no den ma ɛtew piston rod a ebetumi abubu no so kɛse.
HYDRAULIC NKYERƐKYERƐMU
Pɛpɛɛpɛ a ɛkorɔn,Ahoɔden-Akorae,Ntɛmntɛm-Mmuae
Sync servo motor ne draiver, ne dijitaal dose loop control, ahoɔden a wɔkora so andefficiency, ntɛmntɛm mmuae ne pɛpɛɛpɛ control, kɛse stable wɔ low flow tebea.
Nkɔanim motor tumi nhyehyɛe, mfiri ntɛmntɛm ne pii efficiency, tiaa production cycle bere, tu mpɔn production efficiency.
ELECTRIC NKYERƐKYERƐMU
Standard ne ahobammɔ relay,ahobammɔ hydraulic valve ne dade kata ahobammɔ yɛ nea wɔayɛ sɛnea GB2530 ɔman ahobammɔ gyinapɛn, de ka ho thermal master switch ahobammɔ ne anum-tokuru plug ahobammɔ ma ahobammɔ adwumayɛ a afiri no nyinaa tu mpɔn. Nneɛma titiriw a ɛwom ne nneɛma a wɔde fi amannɔne ba te sɛ Schneder, ABB, OMRON ne nea ɛkeka ho.
Ntoatoaso no asiesie ne high-adwuma controller, kɛse LCD display ne adamfofa su a ɛnyɛ den adwumayɛ interface.
Tags a ɛyɛ hyew .: servo motor ma injection molding afiri, China servo motor ma injection molding afiri ayɛfo, wɔn a wɔde ma, adwumayɛbea
