Ɛnyɛ ahoɔhare kɛse/nhyɛso a ɛba fam injection kankyee ne pii parallel kankyee adwene foforo injection afiri a wɔaka abom,nanso nso utilized optimized clamping unit ne lubrication unit ne regenerated hydraulic nhyehyɛe,ɛnam so ma ɛhyɛ bɔ sɛ ɛyɛ tiaa kurukuruwa bere ma thin ɔfasu products.Comparing ne daa type machine, High ahoɔhare pɛpɛɛpɛ injection molding afiri priors to abien no nyinaa kurukuruwa bere ne ahoɔden-saving,minimizing overload of mechanical nhyehyɛe ne hydraulic motor,heightening pintinnyɛ ne nkwa nna.
PARAMETER Amanaman ntam kɛseyɛ ho nkyerɛkyerɛmu
| PARAMETER NKYERƐKYERƐMU | ƆFA | HMD270M8-SPV na ɛwɔ hɔ | |
| amanaman ntam kɛseyɛ ho nkyerɛkyerɛmu | -- | 938/270 | |
| INJECTION NKYEKYƐMU | A | B | |
| Injection volume(nsusuwii) . | cm3 na ɛwɔ hɔ | 530 | 595 |
| Injection mu duru(PS) . | g | 482 | 541 |
| oz | 17 | 19 | |
| Injection dodow a wɔde ma | g/s | 368 | 368 |
| Screw no kɛse | mm | 50 | 53 |
| Nhyɛso a wɔde twitwiw nipadua no mu | MPa | 177 | 158 |
| Skru L/D nsusuwii | -- | 24.5:1 | 23:1 |
| Screw a wɔde hyɛ mu | mm | 270 | |
| Screw ahoɔhare(anammɔn biara) . | r/min | 0~300 | |
| CLAMPING NKYERƐKYERƐMU | |||
| Tumi a wɔde kyekyere nneɛma | kN | 2700 | |
| Mould Opening stroke a ɛyɛ mmerɛw | mm | 560 | |
| Platen kɛse | mm×mm | 860×850 | |
| Ahunmu a ɛda tie bars ntam | mm×mm | 580×570 | |
| Max.awia hann | mm | 1160 | |
| Nkuku mu duru(Min-Max) . | mm | 220-600 | |
| Hydraulic ejection a wɔde hyɛ nipadua mu | mm | 160 | |
| Hydraulic ejection tumi | kN | 77 | |
| TUMI NKYERƐKYERƐMU | |||
| Hydraulic nhyehyɛe no nhyɛso | MPa | 17.5 | |
| Pɔmpɛ motor ahoɔden | kW | 37+37 | |
| Heater ahoɔden | kW | 22.5 | |
| Dodow a ɛwɔ temp control zones mu | -- | 6 | |
| AFOFORO | |||
| Ngo a wɔde gu mu no tumi | L | 380 | |
| Mfiri no nsusuwii(L × W × H) . | m×m×m | 6.2×1.7×2.4 | |
NKYERƐKYERƐMU ƆFA
Hyɛ den Platen a ɛwɔ hɔ
Platen a wɔatu mpɔn a ɛwɔ rigidity nhyehyɛe a ɛkorɔn. Titiriw no ɛfata ma thin-fasu nneɛma
Link
Nitride link ne optimized nhyehyɛe ne pii robustness ne stability.
Kyekyere Nsanombea
Wɔde ally metallic tie bar a ɛma ahoɔden a ɛma nkwa nna no yɛ tenten ahyɛ mu.
Ankasa-srade a wɔde srade Dade, Cooper, na ɔkyerɛwee Nwuram
Self-lubrication bushes hwɛ hu sɛ ɛyɛ adwuma ntɛmntɛm-ahoɔhare kɛse.
NKYERƐKYERƐMU ƆFA
Ɛso Injection Ahoɔhare
Parallel kankyee ne high-speed/low pressure injection kankyee a ɛma kurukuruwa bere tiaa,titiriw ma thin wallproducts.
Nkuruwankuruwa &Barrel
Efficiency adwumayɛ wɔ nneɛma aduan ne soro injection precision.Equipped ne infrared ɔhyew bands,tu mpɔn plasticizing tumi.
Frication a ɛba fam ho nhyehyɛe
Injection unit no de linear guide dii dwuma,na friction no so tew na ɛma ahoɔhare kɔɔ soro bere a wɔreyɛ injection no.
Nsu a wɔde yɛ adwuma Motor a wɔde yɛ adwuma
Hydrolic motor a ɛyɛ ahoɔhare kɛse-.
Mmienu Poma a wɔde yɛ Injection Cylinder
Bi-kwankyerɛ piston poma ma injection cylinder.
Mframa a Wɔde Tow-dum Nozzle
Optonal gyinapɛn ma Swiss brand Herzog shut off nozzle,ɛwɔ ɔkwan a etu mpɔn akwati suck-san
Nsuo a Wɔde Yɛ Adwuma
Nsuo a Wɔde Yɛ Nneɛma
Parallel movement of charging on fly ma kurukuruwa bere tiaa kɛse.
Ɛyɛ nea wɔpaw a wobetumi apaw ama parallel movement of eject on fly.
Electric Unit a Wɔde Yɛ Adwuma
Ɔhwɛfoɔ a ɔhwɛ so
Adapt Italy INOVA kɔmputa,ne 10 inch kɔla LED screen,hu pɛpɛɛpɛyɛ ne ntɛmntɛm adeyɛ.
Electric Element
Contactor ne limited switch adapt Omron ne Schneider.
Tags a ɛyɛ hyew .: ahoɔhare kɛse pɛpɛɛpɛ injection molding afiri, China ahoɔhare kɛse pɛpɛɛpɛ injection molding afiri manufacturers, suppliers, factory
